Glasprodukter

Rør med rund bund, indvendig diameter 14 mm. Sort polypropylen låg, autoklaverbart. Bestilles separat.

Glass Test Tubes 16x100mm, high borosilicate, PP Cap with silicone pad.

Glass Test Tubes 18x100mm, high borosilicate, PP Cap with silicone pad.

Glass beads (Soda lime) are used for mixing or milling. The smaller the beads and the higher their quantity the more intense is the mixing or milling.

Tall form, class A, blue graduation. the blue graduation is fused on the glass and resistant against most acid and alkaline solutions.

Class B (shortline graduation) , with amber stain graduation pthat enetrates into the glass surface and is, therefore, more resistant than the blue, fused-on enamel graduation, Made of borosilicate glass 3.3.

Laboratory bottles made of borosilicate glass 3.3 Simax with white graduation.

3/Q/10 - Macro/Standard Rectangular Open top Quartz cuvette (Fluorimeter) with non-sealing PTFE cover.

Type 3 Rectangular cell for Low Temperature (HLT/GS) made of Quartz to Borofloat graded seal

Break-resistant mailing containers for pathology, made of polypropylene

Slides with high density of the positive charge which significantly increases the binding forces between the slide and the anchored tissue section.

In compliance with DIN ISO 8037/1. Dimensions: approx. 76 x 26 mm, thickness approx. 1 mm. Frosted microscope slides dispose about a silky frosted marking area 20 mm (at one end, on both sides). Pre-cleaned. Ready for use. Autoclavable. Approved for in-vitro diagnostic (IVD) applications according to IVD directive 98/79/EC, with CE-mark, recommended best before date and batch number for comprehensive information and traceability.

Storage boxes made of polypropylene with 2 securely closing clasps

Cover and base are made of cardboard, coated with black paper, with wooden frame.

Thickness no. 1 (0.13-0.16 mm). For in-vitro diagnostic (IVD) applications according to IVD directive 98/79/EC, with CE - mark and batch number for comprehensive information and traceability

Petri dishes made of soda lime glass of 3. hydrolytic class. Bottom part and cover lid are both very flat. This evenness facilitates the uniform spreading of nutrient media and liquids. Optical distortions are minimized when looking at our Petri dishes’ bottoms.

High-Precision cover glass with thickness No. 1.5H featuring an exceptionally accurate thickness of 170 um +/-5um.

Made of transparent polyethylene (PE-LD)

Semi-micro cell with open top suitable for use with all standard cell holders, supplied with non-sealing PTFE cover. 9 has clear walls, 9/B has black walls.